Archive for Serge

NAMM 2014

Posted in modular synthesizers, music, synthesizers with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , on January 24, 2014 by pyraphonic

NAMM 2014 is upon us. This post is NAMM through my narrow lens of interest, mainly modular synthesizers,  and is not meant to be comprehensive, so sit back and enjoy the ride without the incredible sonic wall of noise that pervades the convention.

IMG_3863

IMG_4065
First stop is the Eurorack modular booth hosted by WMD in Hall E.

IMG_3868
The Harvestman rig.

IMG_3876

IMG_3879

IMG_3878

IMG_4025
This showed up later in the day (a SubCon Vampire in The Harvestman’s case).

IMG_3872
Stephen and the Noise Engineering collection.

IMG_3874

IMG_3880
The Ataraxic Translatron in 2 flavors (just different faceplates) and an amazing kick drum module.

IMG_3881
A new oscillator and a new filter. Also a rectifier and divider, which can do far more to a sound than I had imagined.

IMG_3883
A new gate sequencer and a new mixer on the bottom.

IMG_3884
A super unique rhythm generator is in there as well.

IMG_3909
One of the 2 Make Noise systems at NAMM.

IMG_3891 IMG_3893
These are the 2 new control modules which add preset-like functionality to modulars. The CTRLSEL-G can be used to control one or more CTRLSEL-Vs to add precision to live performance situations. They communicate via the power bus, or a cable if in different cases.

IMG_3895
The Teleplexer is an unexpected offering. It works like this: you take a cable coming from a CV source and if you touch the tip to one of the plates, the voltage is sent to the corresponding output(s). The plates are set up so the top row of three route the voltages out of outputs one, two or three, respectively. The second row sends the voltages to one and two, or two and three. The third sends to just one and three, and the fourth is to all three. Below, the same scenario is repeated, but negative voltages are sent to those destinations. With multiple cables at play, things can get complicated.

IMG_3898
The Make Noise reverb, which with certain settings, sounded unlike any reverb I’ve heard before. There are no presets and all parameters are brought out to the front panel and can be controlled via CV.

IMG_3899
Mysteron, the mystery module aka the digital wavguide, arrives!

IMG_3905
Rosie – the cue system with an effects loop.

IMG_4070
A couple close-ups of the 1U mult/utility

IMG_3894

wmd_ssf_case
The WMD/Steady State Fate set up with new modules Amplitude, Pole-Zero, Spectrum, Ultrafold, VCMiniSlew, and the Quad Attenuator. Also Snazzy FX modules in there including the new Telephone Game module. Sorry, this shot is pretty blurry. Can’t win ’em all.

IMG_3918

IMG_3902

IMG_3901

IMG_3921
The newly announced Verbos Electronics set. Looking great, out of the gate, with the cool Rogan knobs Buchla nod and unique color scheme. These look aesthetically and functionally great. They sound as cool as they look as well.

IMG_3923
Mark showing the very skiffable Voltage Multistage.

IMG_3924
That is a thick circuit board!

IMG_3903
4MS with their new modular modular case/boats which look like a great solution for people who are ever expanding, rearrange their system a lot, or want to be able to detach a portion of their system for live use.

IMG_3914
The QCD expander (on the left), which packs a lot of punch in a small space.

IMG_3930
The Delptronics Thunderbell, a CV-able cowbell.

IMG_3932
I believe it will be offered in both Eurorack as well as mounted in a real cowbell. CV for the pitch and the decay. It sounds great.

IMG_3933
Delptronics General MIDI module prototype.

IMG_4005
STG stuff

IMG_3887

IMG_3889

IMG_4007
New Hexinverter modules.

IMG_4060
Koma’s set up.

IMG_4017
Moon Modular sequencer.

IMG_3943
Next I went to check out Gur and Tomio at Tiptop in Hall A in the Big City booth. Sean Costello’s Valhalla Reverb card for the Z-DSP sounds amazing. It is my most anticipated modular purchase of 2014.

IMG_3944

IMG_3945

IMG_3946
An elaborate new sequencer from Tiptop called the Circadian Rhythm.

IMG_3952

IMG_3949
Serge Wilson Analog Delay in eurorack.

IMG_3953
A very capable and flexible looking quantizer.

IMG_3962
Eowave modules.

IMG_3971
Another case at the Big City booth.

IMG_3989
Here’s Todd Barton with the Buchla Music Easel reissue.

IMG_3982

IMG_3976
They were showing the new preset card that links to the iPad via bluetooth.

IMG_3979

IMG_3984
It also looks like they have added (reinstated?) the nuts to the switches.

IMG_3937
The Moog Sub37. Roger O’Donnell (The Cure, Psychedelic Furs, etc.) is the hand model, btw.

IMG_3938

IMG_3941
The Moog Theremini. I’m not gonna lie, I want one! I already have a Big Briar theremin with the CV mods done to it, but this thing was fun to play (it has quantizing) and has a great design.

IMG_3992
The Prophet 12 from Dave Smith.

IMG_3998
An Alquier guitar I checked out.

IMG_4071
They ship with a really unique display/stand that hooks on the back via strap locks.

IMG_4020
The Haken Continuum. This isn’t new, but it was the first time I sat and played it. It is really expressive. Mark Smart played Bach’s Air for me using it and it sounded amazing.

IMG_4045
The Pittsburg Modular Phase Shifter.

IMG_4051
Also the new Pittsburg / Studio Electronics collaboration filter set.

IMG_4078
Critter and Guitari eurorack gear.

IMG_4056
If this Roots board sounds as good as it looks…

IMG_4083
These giant wooden cassette coffee tables from Tayble are lovely.

NAMM is exhausting but fun. I hope I just saved you $12 in parking and a day of traffic jams, lines, noise and crowds. Thank you to Stephen from Noise Engineering and William from WMD for the pass!