Archive for buchla music easel

NAMM 2014

Posted in modular synthesizers, music, synthesizers with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , on January 24, 2014 by pyraphonic

NAMM 2014 is upon us. This post is NAMM through my narrow lens of interest, mainly modular synthesizers,  and is not meant to be comprehensive, so sit back and enjoy the ride without the incredible sonic wall of noise that pervades the convention.

IMG_3863

IMG_4065
First stop is the Eurorack modular booth hosted by WMD in Hall E.

IMG_3868
The Harvestman rig.

IMG_3876

IMG_3879

IMG_3878

IMG_4025
This showed up later in the day (a SubCon Vampire in The Harvestman’s case).

IMG_3872
Stephen and the Noise Engineering collection.

IMG_3874

IMG_3880
The Ataraxic Translatron in 2 flavors (just different faceplates) and an amazing kick drum module.

IMG_3881
A new oscillator and a new filter. Also a rectifier and divider, which can do far more to a sound than I had imagined.

IMG_3883
A new gate sequencer and a new mixer on the bottom.

IMG_3884
A super unique rhythm generator is in there as well.

IMG_3909
One of the 2 Make Noise systems at NAMM.

IMG_3891 IMG_3893
These are the 2 new control modules which add preset-like functionality to modulars. The CTRLSEL-G can be used to control one or more CTRLSEL-Vs to add precision to live performance situations. They communicate via the power bus, or a cable if in different cases.

IMG_3895
The Teleplexer is an unexpected offering. It works like this: you take a cable coming from a CV source and if you touch the tip to one of the plates, the voltage is sent to the corresponding output(s). The plates are set up so the top row of three route the voltages out of outputs one, two or three, respectively. The second row sends the voltages to one and two, or two and three. The third sends to just one and three, and the fourth is to all three. Below, the same scenario is repeated, but negative voltages are sent to those destinations. With multiple cables at play, things can get complicated.

IMG_3898
The Make Noise reverb, which with certain settings, sounded unlike any reverb I’ve heard before. There are no presets and all parameters are brought out to the front panel and can be controlled via CV.

IMG_3899
Mysteron, the mystery module aka the digital wavguide, arrives!

IMG_3905
Rosie – the cue system with an effects loop.

IMG_4070
A couple close-ups of the 1U mult/utility

IMG_3894

wmd_ssf_case
The WMD/Steady State Fate set up with new modules Amplitude, Pole-Zero, Spectrum, Ultrafold, VCMiniSlew, and the Quad Attenuator. Also Snazzy FX modules in there including the new Telephone Game module. Sorry, this shot is pretty blurry. Can’t win ’em all.

IMG_3918

IMG_3902

IMG_3901

IMG_3921
The newly announced Verbos Electronics set. Looking great, out of the gate, with the cool Rogan knobs Buchla nod and unique color scheme. These look aesthetically and functionally great. They sound as cool as they look as well.

IMG_3923
Mark showing the very skiffable Voltage Multistage.

IMG_3924
That is a thick circuit board!

IMG_3903
4MS with their new modular modular case/boats which look like a great solution for people who are ever expanding, rearrange their system a lot, or want to be able to detach a portion of their system for live use.

IMG_3914
The QCD expander (on the left), which packs a lot of punch in a small space.

IMG_3930
The Delptronics Thunderbell, a CV-able cowbell.

IMG_3932
I believe it will be offered in both Eurorack as well as mounted in a real cowbell. CV for the pitch and the decay. It sounds great.

IMG_3933
Delptronics General MIDI module prototype.

IMG_4005
STG stuff

IMG_3887

IMG_3889

IMG_4007
New Hexinverter modules.

IMG_4060
Koma’s set up.

IMG_4017
Moon Modular sequencer.

IMG_3943
Next I went to check out Gur and Tomio at Tiptop in Hall A in the Big City booth. Sean Costello’s Valhalla Reverb card for the Z-DSP sounds amazing. It is my most anticipated modular purchase of 2014.

IMG_3944

IMG_3945

IMG_3946
An elaborate new sequencer from Tiptop called the Circadian Rhythm.

IMG_3952

IMG_3949
Serge Wilson Analog Delay in eurorack.

IMG_3953
A very capable and flexible looking quantizer.

IMG_3962
Eowave modules.

IMG_3971
Another case at the Big City booth.

IMG_3989
Here’s Todd Barton with the Buchla Music Easel reissue.

IMG_3982

IMG_3976
They were showing the new preset card that links to the iPad via bluetooth.

IMG_3979

IMG_3984
It also looks like they have added (reinstated?) the nuts to the switches.

IMG_3937
The Moog Sub37. Roger O’Donnell (The Cure, Psychedelic Furs, etc.) is the hand model, btw.

IMG_3938

IMG_3941
The Moog Theremini. I’m not gonna lie, I want one! I already have a Big Briar theremin with the CV mods done to it, but this thing was fun to play (it has quantizing) and has a great design.

IMG_3992
The Prophet 12 from Dave Smith.

IMG_3998
An Alquier guitar I checked out.

IMG_4071
They ship with a really unique display/stand that hooks on the back via strap locks.

IMG_4020
The Haken Continuum. This isn’t new, but it was the first time I sat and played it. It is really expressive. Mark Smart played Bach’s Air for me using it and it sounded amazing.

IMG_4045
The Pittsburg Modular Phase Shifter.

IMG_4051
Also the new Pittsburg / Studio Electronics collaboration filter set.

IMG_4078
Critter and Guitari eurorack gear.

IMG_4056
If this Roots board sounds as good as it looks…

IMG_4083
These giant wooden cassette coffee tables from Tayble are lovely.

NAMM is exhausting but fun. I hope I just saved you $12 in parking and a day of traffic jams, lines, noise and crowds. Thank you to Stephen from Noise Engineering and William from WMD for the pass!

Advertisements

NAMM 2013

Posted in modular synthesizers, synthesizers with tags , , , , , , , , , , on January 24, 2013 by pyraphonic

NAMM 2013 is here and despite an uncharacteristically rainy day here in Los Angeles, I headed down to the convention center.

IMG_6526

Of course since this is my blog, this will not be a comprehensive summary of the NAMM convention, but rather just a view through my narrow lens of interest. In other words, I first hightailed it downstairs to Hall E where the dregs of the convention hock their wares. I hung out at the Analogue Haven booth most of the day but did make a couple disoriented loops through the whole convention. Come along, here’s what I saw…

The most surprising offering this year is the revival of the Buchla Music Easel or Electric Music Box as it is alternately known. I have lusted over this piece of ’70s gear for many years.

IMG_6589

At $3995 it’s cheaper than a small Buchla 200e system (such as the Skylab which is about $15K). I’m not sure I can resist this. I sense an ebay purge coming up in my near future to fund a purchase of one of these.

IMG_6588

Meanwhile, the Eurorack modular synthesizer world continues to explode. In an earlier post featuring my briefcase modular I mentioned my friend Stephen who helped me build my custom ribbon controller. He has been prototyping modules and has a couple modules on display at NAMM which will be available at Analogue Haven. His company is Noise Engineering and his first module, the Ataraxic Translatron is amazing. It is an oscillator that uses the same technology that made the Atari 2600 sounds (but is not slaved to the video clock!).

at

I’ll post more about this module soon. Here is Stephen showing as much enthusiasm as his programming allows.

IMG_6542

Tiptop Audio had a bunch of new modules on display as well:

Digital Hits which uses CopperLan technology to communicate with the computer

IMG_6545

Trigger Riot which looks like a trigger cousin of the Z8000 sequencer

IMG_6546

and Circadian Rhythm which looks bonkers and awesome

IMG_6625

Make Noise also had their new wares on display:

The RxMx (pronounced “Rix Mix”) is a strangely animated mixer design with a lot of stereo options. Tony is working with Grant Richter on this.

IMG_6527

The MMG, which is like one channel of the QMMG but with more options.

IMG_6537

And development continues on the waveguide oscillator known as “??????” or the “Mystery Module”

IMG_6530

Also on display were flat black Rene sequencers and pressure points. Tony says this is how he originally wanted them to look but there was a mistake in the manufacture of the original runs, which were glossy. I think the flat black looks better.

IMG_6643

IMG_6644

4MS was showing some new stuff as well:

IMG_6618

IMG_6616

Here’s Dan from 4MS dialing in some alien signals

IMG_6568

Pittsburgh Modular had their new housings on display:

IMG_6584

IMG_6583

IMG_6585

Snazzy FX had some new goodies – I’m digging the newer faceplates:

IMG_6631

And over at the Moog booth…Bernie Worrell!!

IMG_6604

And the Anniversary Moog Voyager. I thought it was an odd choice to have my friend Stephen’s face printed on the gold faceplate, but hey, what do I know?

IMG_6581

Analog water is warmer

IMG_6610

Stylophone 2013! This is not your grandad’s stylo…this is pretty cool, actually. It comes with a stylus but you can use your fingers as well.

IMG_6573

The union jack model:

IMG_6575

And to wrap up, some odds & ends:

That insane bowed string keyboard that’s been making the rounds on the interwebs

IMG_6612

I was digging this silverburst Hofner bass copy

IMG_6571

A passionate conversation about shift registers (not kidding)

IMG_6635

Hanging out with Tony of Make Noise and Tomio of Tiptop Audio

synth_doodz

Rasta Tele, mon

IMG_6638

Evil Knievel’s clarinet

IMG_6605

And I can’t even tell you how many ukuleles I saw today. More than I thought existed in the universe. And only at NAMM would one witness this spectacle

IMG_6606

Thank you Gur from Tiptop Audio for the pass! See you all next year!

IMG_6566

ps – Special thanks to the woman dressed like Pocahontas who saved me from standing in the 2 hour long line outside and advised me to take my printout to the the Hilton basement to get my badge. They could have made that a little clearer with some sort of signage.

Modular Synth Briefcase With Custom Ribbon Controller

Posted in DIY, modular synthesizers, synthesizers with tags , , , , , , , , , , on November 11, 2012 by pyraphonic

In an attempt to abate my lust for the impossible to find Buchla Music Easel* or the insanely expensive EMS Synthi, I’ve put together a modular synthesizer using a slim vintage Samsonite briefcase as the housing.

It sits nicely on a laptop stand, a keyboard stand or my lap.

The space above the modules holds the wall wart power supply, the cables, and a bag of adapters when packed up. I may eventually add small speakers up in each corner like the Synthi has. The handle makes a nice cable holder when in use.

I went with eurorack modules to compliment my other modular system. Tiptop Audio 84hp rails fit almost perfectly into the case; I just had to file the ends to fit the contours of the case better. So far it has a Flight of Harmony Choices joystick, a Make Noise DPO, a Make Noise Optomix, a Random Sequencer Turing Machine, a Noise Engineering Ataraxic Translatron (an amazing prototype module from a genius friend of mine I am beta testing – next to that is an empty board from a different prototype), a custom plate with a square wave LFO to run the Random Sequencer and a mono-to-stereo converter with attenuation for output, Tiptop Audio uZeus power and lastly a custom plate with a force sensing resistor and ribbon controller. It is a fun stand-alone unit but also compliments my main system nicely.

The ribbon plate was built with help from friends. I made a template of the layout and Stexe from Slithis made the support beams, cut the plate and made the holes for me in his fabrication laboratory.

The schematic was laid out by my electronics mentor and the same guy who created the Ataraxic Translatron in my case, Stephen McCaul. First I added wires to the sensors, jacks and pots on the plate.

Then I did all the rest of the circuit by gluing the chips to a plastic piece and adding the components like a little electronic sculpture.

Then I wired it all together and was amazed that it all worked on the first try.

The plate is laid out like this: the force sensor has a scalable CV output and a gate out with a threshold pot. The ribbon has a scalable CV output and the two red buttons add positive bias and the black add negative bias to the ribbon output, so they can be used to jump up in pitch or jump down in pitch. The bias buttons each have a trim pot on the board so they can be calibrated as desired. There is also a gate out from the ribbon with a pot for the threshold. The ribbon works best for me when scaled to two octaves. And with various buttons engaged I can go up an octave or down an octave, giving me a four octave range. I mainly use it with the ribbon output to the DPO 1v/oct input and the force sensor output to the Optomix cv input.

Here is a test flight of the ribbon controller as I get a feel for the ribbon and using the bias buttons:

Next time you see a guy with a briefcase it might not be what you think.

*Buchla expert Mark Verbos told me at a Trash Audio event that plenty of other Buchla modules can do what the each of the functions of the Music Easel does but even better, but that system in that case still has for me what Captain Beefheart called “cootie appeal”; it’s too cute to not want one.